Sodium Hypochlorite - 12–15%

Product Description

12–15% Sodium Hypochlorite is a concentrated cleaning and sanitizing solution designed for a wide range of applications:

✅ Removes moss, algae, mould, and milk fats
✅ Helps prevent slippery concrete surface

• General dairy cleaning
• Water treatment (e.g., swimming pools)
• Green algae, moss, and mould removal
• Helps prevent slipperiness on concrete

Directions for Use

Equipment Sanitizing

• Mix 200 ml per 100 L of clean water.
• Apply to previously cleaned and rinsed equipment.
• Allow 5 minutes contact time.

Water Treatment (Swimming Pools)

• Add 5–25 ml per 1,000 L water as needed.
• Allow a minimum 20 minutes contact time.
• Test water the next day – target is at least 0.05 ppm residual chlorine.
• Note: Product strength reduces with age (especially after 6 months). Increase dose if required.

For Environmental Cleaning of Buildings, Houses & Concrete Surfaces
Controls Moss, Algae, Mould and Slime

• Mix 1 part product with 10 parts clean water. 
• Apply and leave for 5 to10 minutes minimum contact time.
• Rinse thoroughly with clean water.
• For heavy soiling, scrubbing may be needed.
• Mix 40–80 mL of House Wash - Soft Wash with sodium hypochlorite for soft wash solution. 

⚠️ Note: Sodium Hypochlorite strength may vary between 12–15% depending on batch and product age.

📄 Safety Data Sheet available on request