Clarity Glass Restore (PASTE)
Removes:
Water spots/stains, mineral deposits, soap scum, rust marks & other stains from:
- Glass
- Stainless steel
- Ceramics
- Triple-plated chrome
- Porcelain
- Vitreous china
- Other hard surfaces
Directions for Use (Machine Application):
Apply using a random orbital sander, buffing machine, or mechanical device with medium-speed circular or orbital action and Velcro hook base.
- Use a non-abrasive pad trimmed to fit the device.
- Impregnate the pad with paste.
- Ensure the surface is dry and free of dust or grime.
- Place the device against the surface, turn on, and clean.
- When using power tools, always use an RCD/safety switch or isolating plug to prevent accidental electrical shock.
Manual (Hand) Application:
Impregnate a non-abrasive pad with about 3 tablespoon of paste (one at a time, working into the pad).Make sure the surface is dry and dust-free.Using two fingers on the pad’s back, rub firmly back-and-forth over a 10 cm area.
Work outward from the cleaned area, adding paste as needed.
Rinse with fresh water and a soft cloth, remove excess water, and dry. Repeat as necessary for stubborn spots.
Outdoor Use:
- Avoid direct sunlight (paste dries quickly).
- If paste dries, lightly moisten with water from a spray bottle.
Safety:
- Non-toxic & safe for humans, pets, the environment, and septic tanks.
- If In Eyes: Flush thoroughly with water. Seek medical help if irritation persists.
- If Ingested: Rinse mouth with water. Seek medical help if irritation develops. Refer to product SDS.
Caution:
- Not recommended for Perspex, plastics, painted surfaces, or other soft materials.
- Always test a small, discreet area first.
Product Care:
- If water is present on the paste surface, stir with a clean paddle or spoon.
- Replace lid after use to prevent drying.
- If paste becomes dry, add a few drops of water and stir.
Keep out of reach of children.
